Fault code lookup: what the scanner is telling you.
Type the code from an OBD scanner, such as P0300 or C0035, to see its standard meaning, what each character says and when to stop driving.
Reading a code
Every code is one letter and four characters.
The second character says who defined the code: 0 is the shared standard, 1 belongs to the car maker. On P codes, the third character names the system, for example 3 for ignition and misfires and 7 to 9 for the gearbox.
What a fault code tells you, and what it does not
When a reading drifts outside its limits, the car’s computer stores a five-character code and often switches on a dashboard light. Petrol cars sold in the United States since 1996 and in Europe since 2001 carry the standard OBD port under the dashboard, so most cars imported into Nigeria have one.
The code names a system and a condition. P0171, for example, says the engine is running lean on one bank. It does not say which part failed: a vacuum leak, a dirty air flow sensor or a weak fuel pump can all set it. That is why a good mechanic tests before replacing anything.
Codes on a used car
Clearing a code switches the light off but leaves the fault in place, and the code comes back after the next self-test. Before buying a used car, ask for a fresh scan and watch the dashboard at switch-on: most lights should flash up briefly, then go out. The warning lights guide explains each one.
Code structure and standard titles: SAE J2012 (diagnostic trouble code definitions). OBD port years: US EPA (1996 model year) and EU directive 98/69/EC (petrol cars from 2001).
Fault code lookup: questions.
What is an OBD fault code?
A five-character code the car's computer stores when a reading or a part goes outside its limits, such as P0300 for a random misfire.
Does the code say which part to replace?
No. It names the system and the condition. A sensor, its wiring or the part it watches can set the same code, so it needs testing first.
Why does my cheap scanner find nothing when a light is on?
Basic readers often reach only the engine computer. Airbag, ABS and tyre pressure faults live in other modules that need a fuller scanner.
Can I just clear the code?
The light goes off, but the fault stays and the code returns after the next self-test.
Want the car kept in view?
Send the make, model and year. The desk books a hidden tracker fitting at home or the office.